How PCR Tells Plasmodium Species Apart: Reading the Bands
I was looking at a photo of an agarose gel the other day. A ladder ran down each end, and between the two ladders sat a row of lanes, each with a bright band at a different height. My first thought was a lazy one: the bands must differ because we picked different primers for each lane, so we are really just labelling the result ourselves. Is the species written into the band, or are we writing it there?
The honest answer is a bit of both, and untangling the two is the whole point of this post. Once you see how the pieces fit, species-specific PCR stops looking like a magic trick and starts looking like good, careful design.
Figure: illustrative agarose gel with a DNA ladder (L) at each end and sample lanes between them. This image is for illustration only and does not show real Plasmodium data.
A band tells you size, and nothing else
Let's start with what a gel actually shows. When PCR copies a stretch of DNA, the product is called an amplicon, which simply means a copy of the target region made in large numbers. When you run that product through an agarose gel, shorter pieces travel farther and longer pieces lag behind. The ladder is a mix of DNA pieces of known lengths, so you can read off roughly how long your own band is.
That is all. A band has no species tag attached to it. It tells you how long the DNA is, and it tells you that the reaction found something to copy. Everything else, including the species name, comes from knowing which primers went into that tube.
Where the real differences live: the 18S rRNA gene
Now for the inherent part. Most species-specific Plasmodium PCR targets the 18S ribosomal RNA gene, often written 18S rRNA or SSU rRNA (small subunit ribosomal RNA). Ribosomes are the machines that build proteins, every cell needs them, and so every Plasmodium species carries this gene. That is why it makes such a handy target. It is also present in several copies per genome, roughly five to seven, which means there is more starting material to find and the test is more sensitive.
Here is the key feature. Along the length of this gene, some stretches are conserved, meaning they are almost identical in every species because changing them would damage the ribosome. Other stretches are variable, meaning evolution has been free to let them drift, so they differ from species to species. Picture a sentence in which most words are the same across four related languages but a few words are different in each. Those few words are what let you tell the languages apart.
These differences are real and built into the parasites. Nobody put them there. Primer design simply takes advantage of them.
Layer one: primers that can read the difference
A primer is a short piece of synthetic DNA, usually around 20 to 30 bases, that sticks to a matching sequence on the template and gives the polymerase a place to start copying. The sticking step is called annealing. The polymerase is the enzyme that builds the new DNA strand, and it can only add bases to the free end of a primer, known as the 3' end (said "three prime").
This is where specificity is won or lost. If the 3' end of the primer matches the template perfectly, the polymerase extends it and copying begins. If the very last base or two do not match, standard Taq polymerase, which has no proofreading ability, extends poorly or not at all. So designers place the 3' end of a species-specific primer right on a base that differs between species, and then use a stringent annealing temperature, meaning a temperature high enough that imperfect matches fall off. The result: the primer pair works on its own species and stays silent on the others.
That is the inherent layer. Without real sequence differences in the gene, there would be nothing for the primers to read.
Layer two: why the bands sit at different heights
Now back to my gel. If every species-specific pair worked on the same gene, why would the bands land at different heights?
Because in the classic assay each species gets its own forward and reverse primer pair, and each pair sits at a different position within the target region. Different positions mean different distances between the two primers, and that distance is the size of the product. This is where my original suspicion was partly right. The sizes are largely a consequence of where we chose to put the primers.
The widely used method is nested PCR, described by Snounou and colleagues (1993). Nested simply means two rounds. In the first round, genus-level primers sit in conserved regions and copy a long fragment from any Plasmodiumspecies present, around 1,100 bp in the commonly cited version of the protocol. A bp, or base pair, is the unit we use to count DNA length. In the second round, a small amount of that first product is moved into fresh tubes, one for each species, each with its own species-specific pair. The first round boosts sensitivity, and the second round supplies the species identity.
Species | Species-specific primer pair | Approximate product size |
|---|---|---|
P. falciparum | rFAL1 and rFAL2 | 205 bp |
P. vivax | rVIV1 and rVIV2 | 120 bp |
P. malariae | rMAL1 and rMAL2 | 144 bp |
P. ovale | rOVA1 and rOVA2 | about 800 bp |
Sizes are as commonly reported; a few papers give slightly different values for P. malariae, and P. ovale is now split into two species (curtisi and wallikeri) with a variant primer set for the second.
So a 120 bp band in the P. vivax tube and a 205 bp band in the P. falciparum tube are not the parasites announcing themselves in different sizes. They are the product of a careful design, in which sequence differences decide which pair works and primer placement decides how big the product is.
A small piece of history
Malaria parasites were first seen under the microscope by Alphonse Laveran in 1880, and for more than a century the blood smear stained with Giemsa remained the everyday way to name the species. It still is the front line in many clinics. Yet microscopy struggles when parasite numbers are low, when a mixed infection hides one species behind another, or when the smear is read by a tired eye at the end of a long shift.
PCR changed that. The Snounou paper appeared in 1993, the very year Kary Mullis received the Nobel Prize in Chemistry for inventing the technique. Within a few years, nested PCR had revealed something microscopy kept missing: mixed infections were far more common than anyone had assumed.
When size is the difference, and when it is not
In nested PCR, size is mostly a design choice. In other formats, size reflects a real difference in the DNA. If two species share the same primers but one has an insertion or deletion between them, the amplicons come out different lengths, and the gel shows it directly.
And some methods drop the gel altogether. In real-time PCR (qPCR), a fluorescent probe, a short DNA piece that glows only when it binds its exact target, reports which species is present. Different probes can carry different coloured dyes, so several species can be read in one tube. Another trick is melt curve analysis: after amplification you slowly heat the product, and the temperature at which the double strand falls apart depends on its sequence and GC content, which differs between species. Same idea, different readout.
What can go wrong
A few cautions are worth putting in any honest write-up of this method.
- Controls matter. A positive control for each species and a no-template control (a tube with water instead of DNA) tell you whether a band is trustworthy or just contamination.
- Isolates vary. A mutation under a primer can cause a false negative, so primers should be checked against parasites from the region where you work.
- Mixed infections can be missed. When one species is far more abundant, it can outcompete the others during amplification, which is a good reason to run separate species-specific reactions.
- Close relatives blur. Some closely related species are nearly identical at 18S, so a primer pair may not separate them. P. knowlesi also needs its own dedicated primer set, since the four-species panel above was not built for it.
The take-home
So, to answer my own question. The species is not written into the band height. It is written into the DNA sequence, and primers read it. The band height is something we then choose through primer placement, so that the answer is easy to read on a gel. Inherent differences decide who gets amplified, and design decides where the band lands.
Next time you look at a gel, ask two questions. What did the primers go looking for? And how far apart did we place them? Those two answers explain nearly every band on the picture.
Related content
Check out What Is Giemsa Stain? The Chemistry and History Behind Malaria Diagnosis for the full chemistry breakdown.
Explore LAMP Primer Design Explained to learn about primer design and assay optimisation.
Read Sanger Sequencing Explained: How One of the Oldest DNA Sequencing Methods Still Works to understand the foundational method that long-read platforms eventually built on.
Our guide to the P. falciparum life cycle breaks down the ring, trophozoite and schizont stages — the same ones you'll be identifying on your Giemsa smears.
References
Snounou, G., Viriyakosol, S., Zhu, X. P., Jarra, W., Pinheiro, L., do Rosario, V. E., Thaithong, S., & Brown, K. N. (1993). High sensitivity of detection of human malaria parasites by the use of nested polymerase chain reaction. Molecular and Biochemical Parasitology, 61(2), 315-320.
Subscribe by Email
Follow Updates Articles from This Blog via Email
.png)
.png)

No Comments